Barcode Integrators serving Ohio including Cleveland, Akron, Youngstown, Michigan and Western PA. Barcode Scanners

Barcode Verifiers
Thermal Transfer Ribbons and Labels


Fixed Scanners
tallgridright.gif (911 bytes)


btn_portableterminals.gif (1161 bytes)



L-10 Heavy-Duty Automatic Label Dispenser

We are offering a new Automatic Label Dispenser. This exciting yet inexpensive product brings the industry new convenience and reliability in Label Dispensers.

You can quickly slide any supply roll of labels up to 4-inches (100mm) wide right onto the built-in Core Holder. It accepts any core diameter from 1.5- to 3-inches and roll diameters up to 8.6-inches (220mm). Then thread the label web onto the take-up spindle and your L-10 Label Dispenser is ready for use!

Using the latest opto-electronic technology, the L-10 reliably and accurately advances your label presenting it for instant picking. There are no mechanical switches to cause adjustment or operational problems. The versatile L-10 works with virtually any kind of label and its heavy-duty design will stand up to the most demanding environments. Rugged, heavy-gauge steel construction and precision parts yield a product of the highest quality. Designed for all-day, every-day use, your L-10 is backed by a

3-Year Parts and Labor Warranty assuring you of trouble-free performance.

Put a new L-10 Automatic Label Dispenser to work for you, today!

Size: HxWxD
Approximately 9x12x9-inches (229x305x229mm).
Shipping Weight: Approximately11 lbs (5 kg).
Label Width:
Any width up to 4.0-inches (100mm). 

Label Length:
Any length up to 4.0-inches (100mm).
Supply Roll Outside Diameter:
8.6” (220mm) maximum.
Supply Roll Core Diameter:
Any diameter from 1.5- to 3-inches.
Label Advance Speed:
Dual range: Switch selectable High-Low.
120vac 60Hz 40va. Specify if 230vac 50Hz is desired. Same price.
3-year Parts and Labor Limited Warranty, by far the longest in the industry.


MC-10A/MC-11 Popular & Economical Label Rewinders

The popular MC-10A and MC-11 Label Rewinders are the world’s lowest-priced Label Rewinders. They are capable of rewinding label rolls up to 4½ -inches wide, up to 8-inches in diameter at speeds up to 10-ips (inches per second). 
The MC-10A has a 3-inch diameter core holder. You can also use the included “coreless rewind” feature to rewind directly on-shaft.

The MC-11 includes a precision-crafted Adjustable Core Holder that adjusts in seconds to accept any core diameter from 1-inch to  4-inches (25- to 102-mm). The MC-11 will also do coreless rewinding.
Both units have Constant Adjustable Torque™ (“CAT”) technology to achieve impressive, reliable performance at an unprecedented low price.  A special motor, designed specifically for the rewinders, offers bi-directional operation and trouble-free performance.  A switch conveniently controls the amount of rewind force. No awkward tensioning arms, troublesome belts, or clutches are used and no speed adjustments are required. The rewinders automatically adjusts to any printer speed up to 10-ips and even allows label back-feeding automatically if your printer requires it.

Both rewinders have an inner label flange to keep the edge of the label web aligned as the labels are being rewound. Also available is an optional Adjustable Paper Guide that mounts directly to the MC-10A or MC-11 base plate and guides the outer edge of the labels. New for the MC-10A is an optional plastic Outer Flange . See photos below right.

Rugged steel construction allows your rewinders to simply be set in place near your label printer.  Special anti-slip feet prevent the unit from moving. 

Label Width:
Up to 4.5-inches (114+ mm).  Maximum Label Roll Weight: 8.5 lbs. (3.9 kg).
Label Roll Diameter:
Up to 8-inches (203+ mm). 
Core Diameter: MC-10A
: 3-inch or coreless.  

: Use any cardboard core from 1- to 4-inches (25 to 102mm) in diameter.
Speed:  Up to 10-ips (25+ cm/sec).  Switch adjustable rewind force. No speed adjustments are required.
Start/Stop: Convenient ON-OFF switch.
Direction:  Bi-directional. 
Power Requirements: 120vac 60Hz. 20 va. UL / CSA Listed Power Supply.
Size: HWD 9 x 6 x 11 in. (229 x 152 x 279 mm).
Weight: 13 lbs. (5.9 kg).

Adjustable Paper Guide (APG-1) guides the outer edge of the label web for MC-10A or MC-11. New for the MC-10A is an optional plastic Outer Flange (MC-10A Flange). See photos.

Warranty:  3-Year Parts and Labor Limited Warranty, the longest in the industry!


Cat-2 Heavy-Duty Label Rewinders

The Constant Adjustable Torquetm ("CAT") technology has made the silent and easy-to-use Cat-2 the “Industry Standard” Label Rewinder. No awkward dancer arms, troublesome belts or clutches are used. Instead, a powerful direct drive motor, designed especially for this application and driven by advanced control circuitry, ensures constant, uniform rewind torque. The result is a short leader length, exceptionally easy threading, no speed adjustments, trouble-free performance, and unsurpassed reliability!  A Torque Control knob allows you to set precisely the amount of rewind force desired. The bi-directional Cat-2 adjusts automatically to any printer speed and even allows for back-feeding labels if your printer requires it. While the Cat-2 Rewinders can also be used as label Unwinders, be sure to check out our complete line of dedicated Unwinders too.

Rugged heavy steel, industrial quality construction allows the Cat-2 to be simply set in place. Special anti-slip feet prevent the unit from moving.  Reliable, high quality and maintenance-free, the Heavy-Duty Cat-2 Label Rewinders feature a 3-Year Parts and Labor Limited Warranty, the longest in the industry! Put the Cat-2 Label Rewinder to work for you today and enjoy a new dimension in label rewinding convenience and reliability. 













The “Industry Standard” Heavy-duty Rewinder for 3” cores. Powerful dual torque ranges. Bi-directional. Adjustable “TORQUE” Control. External “HALT” Control.


Up to 6”



Up to 12”


Up to 30 ips (inches per second)


1” diameter cores.

Up to 6”

Up to 12”

Up to 30 ips

-W9 for labels up to 9.5” wide. 3” cores.

Up to 9.5”

Up to 12”

Up to 30 ips



with Adjustable Core Holder for any core size 1” to 4” in diameter. Single inner flange. Use APG-1 or SP-ACH if an outer flange is desired.


Up to 6”


Up to 11”


Up to 30 ips

-CHUCK with 3” diameter “Quick-Chuck”™ *

Up to 6.5”

Up to 12”

Up to 30 ips

-R16 with 16” roll diameter and extra power.

Up to 6”

Up to 16”

Up to 30 ips

-R16-CHUCK R16 with 3” diameter “Quick-Chuck”™ *

Up to 6.5”

Up to 16”

Up to 30 ips


(NONE) Adjustable Paper Guide. Guides outer edge of label to ensure an even roll edge.



Installs in minutes.



Adapter allows use of 6” dia. Core on 3” dia. CAT-2-CHUCK



Per pair.

* CHUCK Models are also available with a 1-1/2”, 40mm or 70mm diameter “Quick-Chuck”™ at the same price. Specify when ordering.

All models are bi-directional.
 TORQUE ADJUST” - Continuously adjustable torque and braking control; 
EXTERNAL HALT CONTROL” – External SPST control removes power to the motor and applies braking. Its use is optional not required for operation.

12.75H x 15W x 12.5D" (324 x 381 x 318mm).  Cat-2-R16: 18H x 15W x 18D”
Base plate footprint:
7 x 15” (180 x 356mm).  
Approximately 25-30lbs (11.3-13.6kg) depending on model. 

Power Requirements:
120vac 60Hz 55 va. UL Listed Power Supply. 220-240vac also available at same price.
Warranty:  3-Year Parts and Labor Limited Warranty.  
(One [1] Year Limited Warranty on Power Supply Module.)


Send mail to with questions about products or services.
Send mail to with questions or comments about this web site.
Copyright © 1998-2007 Barcode Integrators, Inc.
Web site design by ZTI